DEVICES -> UNIVERSAL MODULES -> UNIV 1.0
|
UNIVERSAL MODULE UNIV 1.0
AND PROCESSOR UNIV 1.0 (CPU) |
||||||
 |
 |
 |
 |
 |
||
|
HARDWARE |
||||
|
|
UNIV 1.0 This is an embedded HAPCAN universal module. Can be used to build one of the system nodes. It needs just a few external components to create sensor or actuator of HAPCAN system. The universal module comes with pre‑programmed CAN bootloader, which allows firmware to be loaded through the system bus.
|
|||
|
|
UNIV 1.0 (CPU) This is a processor of the universal module UNIV 1.0. It has programmed CAN bootloader, which allows firmware to be loaded through the system bus.
|
|||
|
OTHER |
||||
|
|
Device library for EAGLE HAPCAN device library for Eagle software. Contains: · Universal modules UNIV 1.0 and UNIV 2.0. · Processors UNIV 1.0 (CPU) and UNIV 2.0 (CPU). · Tibbo Ethernet Module EM202.
|
|||
|
APPLICATIONS for UNIV 1.0 and UNIV 1.0 (CPU) |
||||
|
BUTTON
|
It is a digital input node. Can be
connected to any voltage free contacts type open/closed e.g.
button, thermostat etc. The node sends message to the bus saying
which input was closed.
|
|||
|
RELAY
|
These devices can control lights, motors
and etc.
|
|||
|
|
ode receives codes from remote controllers. Information of received code is sent to the bus and can control other modules.
|
|||
|
TEMPERATURE SENSOR
|
This is a temperature sensor. It checks
sensor temperature and sends information to the bus. Together
with relay node it can drive heater, fan etc.
|
|||
|
|
This module can send infrared codes like
remote controller, so it is possible to control Audio-Video
stuff by HAPCAN system.
|
|||
|
DIMMER
|
This module can
control varied types of light and also AC
brushed motor
|
|||
